How to calculate fuel usage in a boat sharing relationship

An important part of any boating partnership is to be able to accurately determine individual usage and a cost for that usage. After all, if you’re the one who always gets stuck filling her up, I can guarantee you that the partnership will not last.

How can you accurately determine fuel usage? Let me start off by saying, the only truly accurate way to calculate fuel usage is to have a fuel meter installed on your watercraft.

Why? Just like car, it all depends on how you drive…one partner may putter around burring only 3-5 gallons per hour (GPH) where another may have the need for speed and burn over 15 GPH.

Calculate Fuel Usage in A Boat Sharing

That being said, for general arrangements using the system below…you will be able to calculate an average fuel consumption rate which will help each member keep track of their usage and approximate how much fuel they have burned…

If you are using a system such as Nautical Monkey, you can utilize a checklist for checking on and off the boat. In it, when each partner enters their engine hours used.

The system will automatically calculate the expense for each trip and enter it into an expense tracker.

While figuring out fuel mileage on a car is simpleā€¦Fill the tank completely, jot down the current mileage and drive until the tank is near empty.

At the next fill-up, note the miles traveled and the gallons of fuel it takes to refill the tank. Then divide the miles traveled by the number of gallons of the second fill-up.

Fuel Usage Calculation During Boat Sharing

It’s a different story with your watercraft. On water, miles are not easy to measure, so fuel consumption is measured in GPH. Each watercraft is different, to find your specific watercraft rate of fuel consumption, you can:

  1. First look in your owner’s manual, or online for a review of your watercraft, in many cases you will find that they list estimated GPH based on RPM’s.
  2. Check out Boattest.com or try to find another source that may have reviewed your watercraft.

For example, BoatTest.com tested the Triumph 215 CC and found the best cruise to be at 3500 rpm traveling 22.6 miles-per-hour for a fuel burn rate of 5.3 gallons-per-hour and a range of 268 miles.

When they opened her up they found her top speed at 6000 rpm running 43.1 miles-per-hour with a burn rate of 15.7 gallons-per-hour, and a range of 173 miles on the 70 gallon fuel tank.

If you’re unable to find an estimated GPH for your watercraft, you can use the formulas outlined below. On average, a four-stroke gasoline engine will burn between 0.4 and 0.45 pounds of fuel per hour for each unit of horsepower.

Likewise, a two-stroke outboard burns nearly 0.6 to 0.8 pounds of fuel per hour for each unit of horsepower it produces. It is important to note that at 68 degrees Fahrenheit, a gallon of gasoline weighs about 6.15 pounds, while a gallon of diesel weighs about 7.1 pounds per gallon.

The following formula can be used to estimate your watercrafts GPH:

[Horsepower] * ([approximate lbs consumed in an hour]/[weight of fuel])

For example, a new gasoline powered Triumph 215 CC center console with a Yamaha Motor F 150 (150 horsepower) four-stroke engine, the equation would look something like this:

150 x (.425/6.15) = 10.36 GPH

It is important to understand this is just an estimate, since actual fuel consumption depends on various factors to include the total weight of the watercraft, water conditions and speed, etc.

Simple method for estimating GPH for a four-stroke engine:

  • Diesel engine, multiply your horsepower of the engine by 0.0598
  • Gasoline engine, multiply your horsepower of the engine by 0.0691

Simple method for estimating GPH for a two-stroke engine:

  • Diesel engine, multiply your horsepower of the engine by 0.0985
  • Gasoline engine, multiply your horsepower of the engine by 0.1138
2 Comments

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.